Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.
Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.
21" Lawn mower mulching blade with star. MTD Genuine Factory Part.
Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.
Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.
Rear axle assembly
Rear trail shield
MTD flange lock-nut, 1/4-20.
Blade retaining bolt
Wing knob screw 1/4-20 x 1
Upper handle. You will have note the location of the existing controls and transfer them to the new handle. The original zip ties will likey need to be cut and replaced with new ones.
Self Tapping Screw
Wheel drive belt 3L 34