Door lock & switch assembly
Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
Shock absorber mounting pin
Water inlet valve. The water inlet valve opens to allow hot, cold or warm water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.
Spring assembly with insulators
Washing machine inner tub drive belt, 6 ribs.
Screw, pan head
Universal washing machine water supply hose set. Includes 2 extra strong 6 foot braided stainless steel hoses with hose washers already installed. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Door Seal Boot Kit
Washer door catch. *Note: If door lock and switch assembly has ever been replaced will need Door Strike Item #1032664
Drain hose with 90 degree elbow. 90 inches (7-1/2 feet) long
This hose goes from the tup to the pump. It is designed to catch coins and other items that may fall out of pockets in the wash.
Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.
Front load washer drum vane