Dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.
Rear drum bearing kit. *Bearing plate has slot in it for ground strap. The drum bearing supports the rear of the dryer drum. Over time, the drum bearing wears out. If the drum bearing is worn out, the dryer may make noise.
Dryer drive belt. This is the most common GE/Hotpoint dryer belt. 87" long and 1/4" wide. 4 ridges.The drive belt dries out over time. If the dryer belt cracks or breaks, the dryer drum will not be able to turn. If the dryer motor is running, but the drum won't rotate, the belt has likely broken.
Dryer door catch kit
Dryer motor kit. Replaces old "T" & "V" style motors. Includes 2 motor pulleys and basic directions. Common symptoms of a bad drive motor are:
-Dryer stops turning during cycle
-Dryer won't start
-Dryer won't turn at al
Dryer lint filter. This filter should be cleaned before every load to ensure proper airflow. If the lint filter is torn or damaged, replace it.
Knob clip, also called an insert. If the clip is missing from the knob check on the control stem.
Front drum supports/glides (2), with hardware
Leveling leg, adjustable
Rear dryer drum bearing. Be sure to enter your model number to ensure that you have the right bearing for your model.
High limit thermostat, L258-50F
Clamp & screw kit for blower wheel
Safety thermostat (thermal fuse) L310
Dryer thermostat assembly, L145-15