40 Watt frosted appliance light bulb.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Light/Fan switch, 3 terminal
2 Terminal door switch
Refrigerator/freezer compressor start device and capacitor. The start device and capacitor provides a boost of power to the compressor during start-up. If the start capacitor isn’t working, the compressor may not start.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Screw, 10-24 3/8
Compressor start device combination relay and overload
Light bulb, 7 Watt
Door closing cam kit, Includes both upper and lower cams. One set in black and one in white.
Screw 8 X 1/2
Refrigerator evaporator fan motor assembly. This motor circulates air between the freezer and refrigerator compartments. If defective, the freezer will be cold, but the refrigerator section will not cool properly.
Support wheel. 1 inch thick. 1-3/4 in diameter.
Start capacitor 220 volt 15 mfd.
8-32 X .750 HW LR SG