Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts.
Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)
Light bulb 40watt 120volt meduim standard base. Used in many refrigerators and ranges.
End cap, oven door handle, black. Be aware that not all range handle endcaps require locating pins. If your model does not have locating pins, you may discard them.
Oven door gasket with mounting clips.
Surface burner spark electrode
Porcelain oven light socket
Power line cord
Oven thermostat assembly. This thermostat monitors the temperature inside the oven and cycles on the heat when the oven drops below a set temperature. If the oven does not bake, or if the oven temperature is off by more than 50 degrees Fahrenheit, the oven thermostat may be defective,
Spark module for top burners. This spark module provides power to the spark electrode to produce a spark. If it is defective, the burner may not light.
Oven door handle, black