Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
Dryer door catch kit. If the dryer does not latch properly then either the strike or catch is likely damaged and will need to be replaced.
Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.
Front upper felt glide pad. Includes nylon glides, adhesive, and installation instructions. These drum glides help to support the front of the dryer drum as it rotates.
Rear bearing support for dryer drum. If the drum support ball is also worn you can purchase these items in a drum bearing kit. See related item.
Flame sensor for gas dryer
Gas dryer igniter
High temperature adhesive for installing rubber and felt seals
Seal, blower housing
Strike, dryer door
Glide n Guard floor protectors
Are you moving? Do you need to clean behind your appliance? Use these glides to protect your floors when moving appliances around. These are made from polymer plastics that allow anyone to easily glide appliances for maintenance, cleaning, or relocating.
Screw, pan head