Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.
Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.
Washing machine clutch assembly with hardware. *Blue spring for regular, large, extra and super capacity washers, black for compact models. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.
Washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.
Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.
Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.
Fabric softener dispenser, white, measures approximately 5" round x 4 1/4" tall
White touch-up paint. .6 oz.
Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.
Spanner nut wrench for many Whirlpool, Kenmore, General Electric & Maytag inner tub lock (spanner) nuts
Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.
Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.
Washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.
Washing machine main tub seal