Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
Refrigerator/freezer temperature control thermostat. Temperature issues can be caused by this thermostat.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Refrigerator water inlet valve kit. This valve controls the flow of water to the icemaker and water dispenser.
Door closing cam kit for bottom of refrigerator/freezer door hinges. This closing cam enables the door to close on its own. Consider lubricating the cam during installation.
Refrigerator condenser fan motor kit, 2 watts clockwise rotation, hardware and instructions included. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator will not cool.