40 Watt frosted appliance light bulb.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
2 Terminal door switch
Compressor start device combination relay and overload
Bearing and cup assembly for icemaker
Refrigerator door shelf retainer trim.
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.
Defrost heater for freezer evaporator, 21 inches
Thermostat for modular icemaker, with new clips
Evaporator fan motor for freezer. 115 Volt 1/8" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.
Defrost timer, 8 hour. Turn the dial on the timer clockwise to advance it into and out of defrost.
Defrost thermostat, L47-28 with wires and bracket
Knob, control (frz.)