Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Appliance light bulbs (2 pack).
Compressor run capacitor
Refrigerant system filter/drier with service port
Refrigerant system filter/dryer
Thermostat for modular icemaker, with new clips
Evaporator fan motor for freezer. 115 Volt 3/16" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.
Ice stripper for icemaker
Temperature control thermostat assembly
Defrost thermostat, L47-28 with wires and bracket
Shelf trim retainer
Compressor start relay
Defrost timer control. Turn the dial on the timer clockwise to advance it into and out of defrost.