Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
2 Terminal door switch
Appliance light bulbs (2 pack).
*No longer Frosted
Compressor start device combination relay and overload
Ice cube tray for 48 mini cubes
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.
Water inlet valve
Thermostat for modular icemaker, with new clips
Defrost heater for freezer evaporator, 21 inches
Evaporator fan motor for freezer. 115 Volt 3/16" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.
Defrost thermostat, L47-28 with wires and bracket
Defrost timer control. Turn the dial on the timer clockwise to advance it into and out of defrost.
Shelf trim retainer
Temperature control thermostat assembly