Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.
Snubber ring, *Note: Brake tool for snubber ring no longer available from the manufacturer.
Washing machine transmission pulley (or drive pulley). Includes pulley. thrust washer, and bearing kit. If the washer's bearing is worn out, the washer may spin slowly or may not spin at all.
Washing machine drain pump assembly. This pump is driven by the main drive belt that also drives the transmission pulley. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Tub seal and bearing kit *Call to verify correct kit for model/serial
Washer lid switch with actuator, bracket, and wires
Black door switch actuator
Water level pressure switch.
Washing machine water inlet valve
End cap, left side
End cap, right side
2 Speed drive motor with mounting plate, pulley, spring