40 Watt frosted appliance light bulb.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Compressor run capacitor
37 in. vacuum cleaner attachment for condenser and dryer cleaning - This vacuum cleaner attachment will help to clean dust and lint build-up in and around your refrigerator condenser coils underneath the refrigerator and dryer lint in the area where the lint filter is inserted. Fits 1-1/4 in. vacuum
All-purpose silicon grease, ½ oz. Not food grade.
Black appliance touch-up paint.
Spray paint, white, 12 ounces
Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.
Refrigerator evaporator fan motor. The evaporator fan motor draws air over the evaporator (cooling) coils and circulates the cold air through the refrigerator and freezer compartments.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.