40 Watt frosted appliance light bulb.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint
Compressor run capacitor
All-purpose silicon grease, ½ oz. Not food grade.
Black appliance touch-up paint.
Spray paint, white, 12 ounces
Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.
Refrigerator evaporator fan motor. The evaporator fan motor draws air over the evaporator (cooling) coils and circulates the cold air through the refrigerator and freezer compartments.
T-20 Torx (star) key tool used for some door handle set screws and other T-20 Torx head screws.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Fan blade for evaporator fan motor
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.