KitchenAid Refrigerator Model KSSS36FKT02 Parts
Featured parts for KitchenAid Refrigerator
EveryDrop Ice & Water Refrigerator Filter 5 reduces 16 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 240 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator defrost thermostat. The thermostat clips onto the evaporator. If the refrigerator does not defrost both the thermostat and heater can be tested to determine which part is at fault.
Condenser fan motor kit. The part has been updated by the manufacturer and may not look like the orginal.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Repair kit. Icemaker control module with ice stripper & ejector arm. For In-Door Ice models that make 8 cubes.
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
