40 Watt frosted appliance light bulb.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint. .6 oz.
Refrigerator add-on icemaker kit with 4 wire flat connector and harness for freezer. This kit includes the icemaker, ice bin, inlet valve, fill tube, and hardware. *For 4 wire 8 terminal IM see Recommended Parts.
2 Terminal door switch
Compressor run capacitor
Spray paint, white, 12 ounces
Black appliance touch-up paint.
Universal in-line water filter designed to improve the taste of drinking water and the clarity of ice cubes by reducing contaminants such as lead and chlorine. Push-in fittings can be used in both copper or plastic 1/4 inch water lines. Replace filter every 6 months for optimal performance.
Primary water inlet valve
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator defrost thermostat, clip-on. This defrost heater monitors the temperature of the evaporator coils and sends power to the defrost heater during the defrost cycle. If your defrost thermostat is defective, the refrigerator will not defrost.
Refrigerator defrost drain strap kit to prevent the drain tube from freezing
Roller for base
All-purpose silicon grease, ½ oz. Not food grade.