KitchenAid Refrigerator Model KTRC22EMBL01 Parts
Featured parts for KitchenAid Refrigerator
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator evaporator fan motor with incorporated wire harness. If your fan motor does not have an incorporated wire harness, please see related item below. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.
Condenser fan motor kit. The part has been updated by the manufacturer and may not look like the orginal.
Everydrop Ice & Water Refrigerator Filter 6 reduces 9 contaminants including lead, mercury, pesticides, and industrial chemicals. This filter is used in top freezer models. Replace filter every 6 months or 120 gallons for optimal performance.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator defrost thermostat, clip-on. This defrost heater monitors the temperature of the evaporator coils and sends power to the defrost heater during the defrost cycle. If your defrost thermostat is defective, the refrigerator will not defrost.
Refrigerator door gasket. Color: mist beige. If this gasket is worn out, cold air will leak out of the refrigerator. As a result, the fridge may run longer in an attempt to cool down., or frost may accumulate inside of the refrigerator
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
