40 Watt frosted appliance light bulb.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
White touch-up paint. .6 oz.
Ice container, no auger parts
Refrigerator/freezer temperature control thermostat. Temperature issues can be caused by this thermostat.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Refrigerator water inlet valve kit. This valve controls the flow of water to the icemaker and water dispenser.
Appliance light bulbs (2 pack).
Light bulb, 10 watt. Small screw in base
Ice maker shut off arm
Black appliance touch-up paint.
Spray paint, white, 12 ounces
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.