Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
Front glide for oven drawer. Requires (2) one for each side. For the rear glides see related parts below.
8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.