EveryDrop Ice & Water Refrigerator Filter 3 reduces 66 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 200 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.
EveryDrop Ice & Water Refrigerator Filter 5 reduces 16 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 240 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.
Refrigerator water inlet valve.
-Some models use a separate customer connection fitting, if that is needed see Recommended Parts.
Refrigerator Icemaker assembly. This icemaker fits models that have the icebucket in the door. The bottom mounting bracket on the old icemaker must be reused.
Three terminal fan/light door switch
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator ice level control board. The ice level control board uses an infrared beam to sense the level of ice in the ice bucket and signal the ice maker to make more ice. If the ice level control board fails, the ice maker will stop making ice.
Repair kit. Icemaker control module with ice stripper & ejector arm. For In-Door Ice models that make 8 cubes.
Thermostat for modular icemaker, with new clips