EveryDrop Ice & Water Refrigerator Filter 3 reduces 66 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 200 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator water inlet valve.
-Some models use a separate customer connection fitting, if that is needed see Recommended Parts.
Three terminal fan/light door switch
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Repair kit. Icemaker control module with ice stripper & ejector arm. For In-Door Ice models that make 8 cubes.
Thermostat for modular icemaker, with new clips