Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
Dryer door catch kit. If the dryer does not latch properly then either the strike or catch is likely damaged and will need to be replaced.
Flame sensor for gas dryer
Dryer drum drive belt. 87 3/4 inches long and 1/2 inch wide. This drive belt wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If this belt is cracked or broken, the dryer drum will not turn.
Igniter, gas dryer, round
Door gasket with push in tabs
Gas valve kit, 3 coil
Upper Front Glide And Seal Kit
Motor pulley, 1ea. (no set-screw, re-use old one)
Blower wheel assembly
Leveling leg kit
Drive motor assembly