Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.
Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
Washing machine water inlet and dispenser valve assembly. If the washer does not fill properly the valve may be resticted and need replacement. We do not recommend taking inlet valves apart and trying to clean them due to the risk of failure after repair.
Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.
Washing machine rear outer tub assembly with bearings. If the tub bearing system is defective the washer can become very noisy.