Washer water inlet valve. If the washer does not fill or fills slowly then the water inlet valve may be defective. We do not recommend taking apart water valves to clean them as the risk of failure and water leaking is increased
Hose from outer tub to the drain pump
Timer knob, white
Knob clip, also called an insert. If the clip is missing from the knob check on the control stem.
Suspension rod and spring assembly, green
Shaft and mode shifter assembly. The new mode shifter mounting holes are not threaded. You will need to use the original self tapping screws to install the new mode shifter assembly.
Mounting clip for washing machine drain hose.
Hub, inner tub base
Suspension rod and spring assembly, black
Pressure switch hose
Plastic retainer clip to hold timer knob on timer shaft
Suspension rod support
Anti-sipohn hose clip
Drain hose, pump to cabinet