Washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.
Washing machine agitator assembly.
Washer or dryer selector switch knob with clip in white.
Washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.
Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.
Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.
Washing machine drive belt - Lengh is 29 1/2 Inches x 1/2 inch. V shaped.
Split ring bushing at outer tub
Pressure switch hose
Hub nut for top-load washer. If this nut is stripped or damaged, the washer may be noisy.
Nut size is 1 11/16"
Mounting clip for washing machine drain hose.
Hose from outer tub to the drain pump
Washer tub bearing. This tub bearing helps to keep the inner tub spinning smoothly.
Suspension rod support
Knob clip, also called an insert. If the clip is missing from the knob check on the control stem.