White touch-up paint. .6 oz.
Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Door strike attached to inner door panel
Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.
Spray paint, white, 12 ounces
Washing machine rubber door boot seal. Creates seal between front of washing machine and tub that holds the water. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.
Door lock latch
Tub to pump hose
Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.
Boot seal front clamp ring
Washing machine water inlet valve assembly. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.
Hose clamp, spring tension