Chrome drip bowl for 6-inch electric coil burner. This drip bowl sits underneath the burner to catch drips or spills.
Chrome drip bowl (also called a drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
Front glide for oven drawer. Requires (2) one for each side. For the rear glides see related parts below.
Rear glide for oven lower storage drawer.
Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts
Appliance light bulbs (2 pack).
*No longer Frosted
Surface element control switch for the small surface element
White clock overlay
Oven bake element. If the oven won't heat, the bake element may have burned out. If the bake element has burned out, it will often be visibly damaged. Inspect the bake element for holes or blisters.
Electronic oven control board. If the oven does not bake or broil then it is possible the circuit board has failed. Both heating elements can be tested to determine if the problem is with the element or the control board.
Terminal block kit for electric range and dryer power cords.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.