Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Appliance light bulb, clear 120 Volt 40 Watt Regular Base
Surface element control switch for the large surface element. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Oven temperature sensor
Oven door handle mounting screw. If the new screw will not keep the handle tight the handle may be stripped and will need to be replaced.
Surface element control switch for the small surface element
Oven bottom panel. Porcelain coated steel.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Range/stove radiant surface element for 6-inch burner. 1200 watts. If the surface element is not heating, use a multimeter to test the element for continuity. If the element has continuity, the surface element switch is likely defective.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Dual surface element, 9 inches/ 6 inches. 1200/2500 watt
Radiant surface element