Washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.
Washing machine agitator assembly.
Washer or dryer selector switch knob with clip in white.
Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.
Washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.
Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.
Hub nut for top-load washer. If this nut is stripped or damaged, the washer may be noisy.
Nut size is 1 11/16"
Washing machine drive belt - Lengh is 29 1/2 Inches x 1/2 inch. V shaped.
Split ring bushing at outer tub
Wrench for removing and installing washer tub retainer nut on General Electric & Hotpoint top load washing machines
Washer tub bearing. This tub bearing helps to keep the inner tub spinning smoothly.
Hose from outer tub to the drain pump
Knob clip, also called an insert. If the clip is missing from the knob check on the control stem.
Fabric softener dispenser for top of agitator