Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.
Dryer drum drive belt, 5 rib
Dryer drum support roller assembly
Dryer blower housing and blower wheel assembly. If the dryer takes too long to dryer or is noisy then the blower wheel could be damaged and require replacement.
Dryer thermistor. This thermistor should read approximately 50,000 (50K) Ohms of resistance at 77 degrees Fahrenheit. *Note that it is not in the heating circuit so it likely will not be the cause of a dryer heating problem. It can however effect cycle times or cause a fault if defective.
Upper door catch, gray
Dryer drum drive motor with pulley for drum belt and reverse threads for blower wheel.
Dryer door gasket
Thermal Fuse, flush mount (Non Resetable)
Dryer lint screen at door opening. Proper air flow is critical to dryer operation so the filter should be cleaned before every load. Replace the filter if it has any tears or rips in it.
Strike, dryer door
Flame sensor for gas dryer
High temperature adhesive for installing rubber and felt seals