Oven igniter with wire harness
Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.
Oven temperature sensor *May require cutting and splicing wire connector
Oven light bulb, clear 120 Volt 40 Watt
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Igniter/orifice mounting screw
Conversion kit for allowing range to be converted to LP from Natural gas. Includes instructions.
Stove top burner control knob in black.
Clock overlay, black. Clock control sold seperately
Burner cap, 5K, black
Power cord assembly, gas range
Orifice, top burner, 9.5K, Natural
Spark ignition switch with wire harness