Gas valve solenoid coil 3 terminal
Dryer gas valve solenoid coil. Has two terminals.
Inlet control thermistor.Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.
Dryer center outlet thermistor. *Note that it is not in the heating circuit so it likely will not be the cause of a dryer heating problem. It can however effect cycle times or cause a fault if defective. The resistence reading should read around 100 k ohms at room temperature.
Dryer blower wheel. The blower wheel draws air through the dryer and pushes the air out the vent. Clumps of lint, socks, and small articles of clothing can escape the lint filter and get caught in the blower wheel. If an object is caught in the blower wheel, the dryer may make noise.
Thermostat, high limit
Thermostat outlet backup org.
Dryer lint filter