Dishwasher hinge cable. This cable connects the door hinge to the door spring.
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed. Please see Recommended Parts for water inlet information.
Dishwasher hinge spring. If the door feels heavy or is noisy while opening and closing then one or both of the door springs are likely defective.
Dishwasher lower dishrack roller and axle assembly with mounting clip.
Upper dishwasher dishrack roller and axle assembly. This roller clips onto the upper dishrack to allow it to move in and out of the dishwasher. Because these rollers generally wear out at the same time, we recommend replacing them in pairs.
Dishwasher door seal. Creates a seal around the dishwasher door to prevent water from leaking out. If the seal is torn, the dishwasher may leak water. About 74.5 inches long.
Circulation and drain pump and motor assembly
Diverter motor for upper and lower spray arms
Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.
Noise filter assembly
Upper dishrack assembly
Dishwasher heating element with thermistor. If the dishwasher isn't drying dishes properly, the heating element may be defective.
Diverter motor shaft seal in pump housing
Dishwasher water inlet valve. 120 Volt 60 Hz. AC.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement. If the dishwasher is under filling, it won't clean dishes effectively.
Dishwasher pump filter. If the filter screen is damaged then it should be replaced to prevent the pump from becoming clogged.