Washer belt kit for Maytag models. If the washer does not agitate, spin, or drain then one of the belts could be worn and require replacement. Belt sizes: 41 in x 5/16 in, 42-1/3in by 7/16 in
High temperature adhesive for installing rubber feet and felt seals, 2 ounces.
Spanner nut wrench for many Whirlpool, Kenmore, General Electric & Maytag inner tub lock (spanner) nuts
Dryer door/washer lid switch kit. Comes with dryer mounting bracket, (2) wire terminals and (2) mounting screws.
Washing machine tub seal repair kit. This kit is for Maytag two belt washers. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.
Screw, 10-24 3/8
Maytag two belt washing machine drain pump. If the washer does not drain then the pump could be clogged or defective.
6 Foot fill hose, one straight & one elbow, requires 2 washers
Washing machine tub bearing repair kit. The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it may lock up and prevent the washer from spinning.
Adjustable leveling leg with stop-nut
Lid hinge ball
Break bearing above brake assembly. Maytag two belt washer.