Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Light bulb 40 watt 120 volt medium standard base. Used in many refrigerators and ranges.
Refrigerator condenser fan motor kit, 2 watts clockwise rotation, hardware and instructions included. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator will not cool.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator door shelf end cap, white. Can be used for right-hand or left-hand side.
Door shelf trim. It may be necessary to cut this trim to fit your refrigerator model.
Refrigerator door gasket, white, 31-1/2 X 41 inches. If this gasket is worn out, cold air will leak out of the refrigerator, and the refrigerator will have to work harder to cool down. As a result, the refrigerator may run longer than normal, or frost may accumulate inside of the refrigerator.