All-purpose silicon grease, ½ oz. Not food grade.
Compressor start device combination relay and overload
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Screw, white and almond models
1/4" Plastic tubing, 8 1/2 feet long
Screw 8 X 1/2
Screw 8-18 x 1/2
Bearing and cup assembly for icemaker
Start capacitor 220 volt 15 mfd.
Evaporator fan motor for freezer. 115 Volt 3/16" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.
Thermostat for modular icemaker, with new clips
Refrigerant system filter/drier with service port
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.