40 Watt frosted appliance light bulb.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
2 Terminal door switch
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
All-purpose silicon grease, ½ oz. Not food grade.
Screw, white and almond models
Ice cube tray for 48 mini cubes
Screw 8 X 1/2
Screw 8-18 x 1/2
Refrigerant system filter/drier with service port
1/4" Plastic tubing, 8 1/2 feet long
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.
Thermostat for modular icemaker, with new clips
Evaporator fan motor for freezer. 115 Volt 3/16" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.