Oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of oven. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters.
Burner drip bowl (or drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Burner drip bowl (also called a drip pan) for 6-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Stove top heating element terminal block kit (receptacle). If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both will likely need to be replaced.
Range/stove terminal block (receptacle) kit. The surface element plugs onto this receptacle. If the receptacle's contacts are burned out, the surface element will not get power.
Oven broiler heating element
Main terminal block for power cord
Oven thermostat assembly. If the oven does not heat or the temperature is off by more than 50 degrees than the oven thermostat may be defective.
Range anti-tip bracket. This bracket helps to secure the range and prevent it from tipping over.
Broiler pan grill kit, porcelain, includes grill and bottom pan. Color may vary.
Oven wrap insulation
Surface element control switch for large element. 2100 watts. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.