LG Dishwasher Model LDS4821BB Parts

Dishwasher hinge cable. This cable connects the door hinge to the door spring.

Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed. Please see Recommended Parts for water inlet information.

Dishwasher lower dishrack roller and axle assembly with mounting clip.

Upper dishwasher dishrack roller and axle assembly. This roller clips onto the upper dishrack to allow it to move in and out of the dishwasher. Because these rollers generally wear out at the same time, we recommend replacing them in pairs.

Dishwasher door seal. Creates a seal around the dishwasher door to prevent water from leaking out. If the seal is torn, the dishwasher may leak water. About 74.5 inches long.

Circulation and drain pump and motor assembly

Diverter motor for upper and lower spray arms

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.

Noise filter assembly

Door latch

Dishwasher heating element with thermistor. If the dishwasher isn't drying dishes properly, the heating element may be defective.

Upper dishrack assembly

Dishwasher pump filter. If the filter screen is damaged then it should be replaced to prevent the pump from becoming clogged.

Gasket

Diverter motor shaft seal in pump housing