1/4" Plastic tubing, 8 1/2 feet long
Defrost heater and thermostat kit
8-32 X .750 HW LR SG
Solenoid and door kit, ice dispenser. *Please note: Spring is not included in kit.
Thermostat for modular icemaker, with new clips
Evaporator fan motor for freezer. 115 Volt 3/16" shaft. The evaporator fan motor draws air over the evaporator coils and circulates the cold air through the refrigerator and freezer compartments.
Dual water inlet valve with 1/4" compression inlet fitting & push-in quick connect outlets. If original outlet tubes have nuts cut them off and gently push tubes into new valve quick connect ports. To release tubes push white plastic rings in.
Screw 1/4" hex head, 10-12 x 1/2
Bearing and cup assembly for icemaker
Defrost timer, 8 hour. Turn the dial on the timer clockwise to advance it into and out of defrost.
Return spring for ice chute door
Nut, 1/4" plastic water line