LG Washing Machine Model WM2455HW/00 Parts

LG Washing Machine Model WM2455HW/00 Parts
Brand:LG
Model:WM2455HW/00
Product:Washing Machine
Subtype:Front Loading

Featured parts for LG Washing Machine

104 results
Go
Watch Video
$47.03
28% Off MSRP: $65.12

Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Watch Video
$72.90

Washing machine door boot gasket with drain port. If the door boot is torn, the washer will leak water. The most common cause of a torn door boot is if the washer is overloaded. Be aware that your model may also list a door boot without drain port. Be sure to check the original part before ordering.

Watch Video
$19.16

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Watch Video
$47.81

Washer cold water inlet valve assembly. Three solenoids. Hot water valve is a separate single coil valve and can be found in related parts

Watch Video
$51.74

Washer door lock latch assembly. The door lock secures the washer door shut during operation. Once the washing machine door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.

Watch Video
$16.34

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Watch Video
$40.29

Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Watch Video
$31.96

Washing machine rotor position sensor assembly. This part is also called a hall sensor or motor sensor. When this part fails the control may display an LE error code.

Watch Video
$16.34

Washing machine tub seal. If the washing machine is leaking water from above the transmission, this seal is likely damaged or worn out.

Watch Video
$27.17

Washer tub bearing, rear. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Watch Video
$15.82

Washing machine shipping bolt assembly, long. Shipping bolts are installed to secure the washer tub during transportation.

Watch Video
$14.96

Washing machine short shipping bolt assembly. Keeps the tubs from moving during shipping to prevent damage.

Watch Video
$29.07

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Go
Related Articles & Videos
Common Problems
With most appliances and equipment there are only a handful of problems that crop up. Since 1912, we've learned to recognize the most common problems ― and their solutions. Do any of these look familiar?
Washer won't spin
6 possible causes and potential solutions
Washer won't spin
Washer is making loud noise
5 possible causes and potential solutions
Washer is making loud noise
Washer won't agitate
4 possible causes and potential solutions
Washer won't agitate