Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Light bulb 40 watt 120 volt medium standard base. Used in many refrigerators and ranges.
2 Terminal door switch
Refrigerator condenser fan motor kit, 2 watts clockwise rotation, hardware and instructions included. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator will not cool.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Compressor start device combination relay and overload
Refrigerator door shelf end cap, white. Can be used for right-hand or left-hand side.
All-purpose silicon grease, ½ oz. Not food grade.
Door shelf trim. It may be necessary to cut this trim to fit your refrigerator model.
Light bulb, frosted, 40 watt
Ice cube making tray
Screw 8 X 1/2
Screw 8-18 x 1/2
1/4" Plastic tubing, 8 1/2 feet long