40 Watt frosted appliance light bulb.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
2 Terminal door switch
Refrigerator/freezer compressor start device and capacitor. The start device and capacitor provides a boost of power to the compressor during start-up. If the start capacitor isn’t working, the compressor may not start.
Refrigerator condenser fan motor kit, 2 watts clockwise rotation, hardware and instructions included. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator will not cool.
Freezer door gasket, white. 23 3/4 inches by 31 1/2 inches. If the gasket is defective, cold air will leak out of the freezer. As a result, the freezer may run longer than normal, or frost may accumulate inside of the freezer.
Fan blade for evaporator fan motor
Screw, 10-24 3/8
Freezer door handle, white
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.
Refrigerator defrost timer. Turn the dial on the timer clockwise to advance it into and out of defrost.
Ice maker shut off arm
Light bulb, frosted, 40 watt