Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 to 3.6. The igniter is the most commonly defective part for a gas oven not heating correctly or at all.
Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.
Oven temperature sensor *May require cutting and splicing wire connector
Appliance light bulbs (2 pack).
Igniter/orifice mounting screw
White clock overlay
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Surface burner base, medium, 9.5K
Clock overlay, black. Clock control sold seperately
Broiler pan and insert
Burner cap, medium, black
Power cord assembly, gas range