Kenmore Range/Stove/Oven Model 790.94112401 Parts
Featured parts for Kenmore Range/Stove/Oven
Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
