Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.
Appliance light bulbs (2 pack).
Oven bottom panel. Porcelain coated steel.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven control board, overlay not included. If the oven does not bake or broil then it is possible the circuit board has failed. Both heating elements can be tested to determine if the problem is with the element or the control board.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.
Clock overlay, black
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Oven door glass.
Screw,8-18 x 0.5 ,chrome