Surface element control switch for the large surface element. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Oven temperature sensor *May require cutting and splicing wire connector
Front glide for oven drawer. Requires (2) one for each side. For the rear glides see related parts below.
Rear glide for oven lower storage drawer.
Electronic oven control board. Also known as electronic clock control. Displays the time of day and controls the oven bake, broil functions.
Appliance light bulbs (2 pack).
Surface element control switch for the small surface element
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Range/stove radiant surface element for 6-inch burner. 1200 watts. If the surface element is not heating, use a multimeter to test the element for continuity. If the element has continuity, the surface element switch is likely defective.
Oven bake element. If the oven won't heat, the bake element may have burned out. If the bake element has burned out, it will often be visibly damaged. Inspect the bake element for holes or blisters.
Oven bottom insulation
Clock overlay, black. Clock control sold seperately