Oven door handle mounting screw. If the new screw will not keep the handle tight the handle may be stripped and will need to be replaced.
Appliance light bulbs (2 pack).
Oven bottom panel. Porcelain coated steel.
Oven control board, overlay not included. If the oven does not bake or broil then it is possible the circuit board has failed. Both heating elements can be tested to determine if the problem is with the element or the control board.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Radiant surface element, 6-inch 1200 Watts
Dual surface element, 9 inches/ 6 inches. 1200/2500 watt
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Door handle with 2 screws
Clock overlay, black
Broiler pan and insert
Radiant surface element, 9-inch 2500 Watt
Rear drawer glide
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.