Appliance light bulbs (2 pack).
Oven bottom panel. Porcelain coated steel.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven control board, overlay not included. If the oven does not bake or broil then it is possible the circuit board has failed. Both heating elements can be tested to determine if the problem is with the element or the control board.
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Range/stove radiant surface element for 6-inch burner. 1200 watts. If the surface element is not heating, use a multimeter to test the element for continuity. If the element has continuity, the surface element switch is likely defective.
Dual surface element, 9 inches/ 6 inches. 1200/2500 watt
Oven bottom insulation
Rear drawer glide
Clock overlay, white
Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Radiant surface element