Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.
Modular ice maker replacement ice cube mold and heater assembly, flake resistant surface
Thermostat for modular icemaker, with new clips
Bearing and cup assembly for icemaker
Ice maker module front cover
Washer for fill hose
Nut, 1/4" plastic water line
Ice stripper for icemaker
Inserts for 1/4 inch plastic tubing (package of 4)
Screw 1/4" hex head, 10-12 x 1/2